16. You have a DHCP server that runs Windows Server 2008.
You restore the DHCP database by using a recent backup.
You need to prevent DHCP clients from receiving IP addresses that are currently in use on the network.
What should you do?
A. Add the DHCP server option 15.
B. Add the DHCP server option 44.
C. Set the Conflict […]

11. Your company has four DNS servers that run Windows Server 2008. Each server has a static IP address.
You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.
What should you do?
A. Create a new scope for the DNS servers.
B. Create a reservation for the DHCP server.
C. Configure the 005 […]

6. Your company has recently deployed a server that runs Windows Server 2008. The server has the IP
information shown below:
IP address: 192.168.46.186
Subnet mask: 255.255.255.192
Default gateway: 192.168.46.1
Users on remote subnets report that they are unable to connect to the server.
You need to ensure all users are able to connect to the server.
What should you do?
A. Change […]

1. Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22. The
network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A. Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B. Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment […]